initial Debian/Devuan commit

1 files changed, 79 insertions, 0 deletions

diff --git a/my-x200.confd b/my-x200.confd
new file mode 100644
index 0000000..74b941e
--- /dev/null
+++ b/my-x200.confd
@@ -0,0 +1,79 @@
+# /etc/default/my-x200: config file for /etc/init.d/my-x200
+
+#########################################
+# Options to pass to the my-x200 daemon #
+#########################################
+
+# Is this machine a Thinkpad X200?  If so, my-x200 can eliminate the
+# whining noise that is noticeable when the brightness of the screen
+# is lowered.
+
+is_thinkpad_x200="yes" # (yes|no)
+
+PWMFREQ_RATE="0x8bb7b16dc5b6a"
+
+####################
+# Privacy settings #
+####################
+
+# To enable privacy settings, set enable_privacy to 'true' and supply
+# the right name of the wired internet interface that may or may not
+# be connected to the internet so that its MAC address can be spoofed
+# at startup.  Additionally, my-x200 will delete /var/lib/dhcpcd/duid,
+# and generate a new DUID-LLT based file with an updated timestamp.
+
+# IMPORTANT NOTICE: As dhcpcd uses ANY ONE network interface that is
+# connected to the DHCP device to generate the DIUD-LLT file, the
+# wireless interface MUST have its MAC address spoofed as well.  To
+# make wpa_supplicant handle this, add the following lines in
+# /etc/wpa_supplicant/wpa_supplicant.conf:
+# ctrl_interface=DIR=/run/wpa_supplicant GROUP=netdev
+# update_config=1
+# mac_addr=1
+# preassoc_mac_addr=1
+
+# Finally, it is advisable to set the hostname to "localhost" and have
+# "hostname_short" in /etc/dhcpcd.conf so that the actual hostname of
+# the machine should not be sent to the DHCP server.
+
+enable_privacy="false" # either 'true' or 'false'
+wired_interface=""     # supply the actual interface name! In case of
+                       # doubt, see the output of 'ls /sys/class/net/'
+
+##################
+# Backup options #
+##################
+
+# Activate autobackup on shutdown (true/false)?
+conf_autobackup="false"
+# Use rsnaphot (true/false)? 'false' means 'use rsync':
+use_rsnapshot="false"
+
+############################
+# rsync/rsnapshot settings #
+############################
+
+# Path to backup directory (note that rsnapshot additionally needs
+# this to be specified as 'snapshot_root' in /etc/rsnapshot.conf):
+conf_backup_path="/mnt/disk/snapshots"
+
+# The following option applies both to rsync and rsnapshot.
+# Control file.  This (empty) file must exist in the backup directory:
+conf_control_file="dobackup"
+
+######################
+# rsync-only setting #
+######################
+
+# rsync only option:
+# Directories to backup:
+conf_backup_dirs="/etc /root /usr/local /home"
+
+##########################
+# rsnapshot-only setting #
+##########################
+
+# Use the following line to have specific arguments passed to
+# rsnapshot such as 'daily' or the like.  By default, my-x200 uses
+# 'alpha', which is already defined in /etc/rsnapshot.conf:
+rsnapshot_args="alpha"