From 7c35c758d9ba991acd0e5728950c67ca065d872d Mon Sep 17 00:00:00 2001
From: Robert Alessi <alessi@robertalessi.net>
Date: Mon, 22 Feb 2021 18:13:04 +0100
Subject: updated README.md

---
 about.html | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'about.html')

diff --git a/about.html b/about.html
index 7562d1d..3be567c 100644
--- a/about.html
+++ b/about.html
@@ -67,7 +67,8 @@
 <h2 id="noise-removal">Noise Removal</h2>
 <p>Set the variable <code>is_thinkpad_x200</code> to <code>yes</code> (which is the default value). The default frequency rate should work. It may be changed by modifying the value of <code>PWMFREQ_RATE</code>.</p>
 <h2 id="privacy-settings">Privacy Settings</h2>
-<p><code>/etc/default/my-x200</code> also provides a “Privacy Settings” section: if <code>enable_privacy</code> is set to <code>true</code>, then the wired internet interface that may or may not be connected to the internet will have its MAC address spoofed at startup. (The wireless interfaces must also be spoofed, but this can be handled by wpa_supplicant: see below.) Additionally, <code>my-x200</code> will delete <code>/var/lib/dhcpcd/duid</code>, and use <code>/proc/sys/kernel/random/boot_id</code> to generate a new DUID-LLT-based file with an updated timestamp. A new DUID is generated each time the computer is started.</p>
+<p><code>/etc/default/my-x200</code> also provides a “Privacy Settings” section: if <code>enable_privacy</code> is set to <code>true</code>, then the wired internet interface that may or may not be connected to the internet will have its MAC address spoofed at startup. (The wireless interfaces must also be spoofed, but this can be handled by <code>wpa_supplicant</code>: see below.) Additionally, <code>my-x200</code> will delete <code>/var/lib/dhcpcd/duid</code>, and use <code>/proc/sys/kernel/random/boot_id</code> to generate a new DUID-LLT-based file with an updated timestamp. A new DUID is generated each time the computer is started.</p>
+<p>It must be noted that when <code>enable_privacy</code> is set to <code>true</code> <code>my-x200</code> turns off the wifi radio at computer startup and each time it is put to sleep. The wifi radio has to be turned on or turned back on manually by pressing <code>Fn-F5</code></p>
 <h2 id="backup">Backup</h2>
 <p>Finally <code>my-x200</code> has the ability to backup essential files or directories—for instance to a backup disk mounted inside the dock. Of course, the backup process is triggered on certain conditions only:</p>
 <ol type="1">
-- 
cgit v1.2.3