2 files changed, 5 insertions, 5 deletions

diff --git a/README.md b/README.md
index 6e57159..958ce2f 100644
--- a/README.md
+++ b/README.md
@@ -43,18 +43,18 @@ Once installed, `my-x200` is configured by editing
 Noise Removal
 -------------
 Set the variable `is_thinkpad_x200` to `yes` (which is the default
-value).  The default frequency rate should work. It may be change by
+value).  The default frequency rate should work. It may be changed by
 modifying the value of `PWMFREQ_RATE`.
 
 Privacy Settings
 ----------------
-`/etc/default/my-x200` also provides a “Privacy settings” section: if
+`/etc/default/my-x200` also provides a “Privacy Settings” section: if
 `enable_privacy` is set to `true`, then the wired internet interface
 that may or may not be connected to the internet will have its MAC
 address spoofed at startup. (The wireless interfaces must also be
 spoofed, but this can be handled by wpa_supplicant: see below.)
 Additionally, `my-x200` will delete `/var/lib/dhcpcd/duid`, and use
-`/proc/sys/kernel/random/boot_id` to generate a new DUID-LLT based
+`/proc/sys/kernel/random/boot_id` to generate a new DUID-LLT-based
 file with an updated timestamp. A new DUID is generated each time the
 computer is started.
 
diff --git a/about.html b/about.html
index 5db3d43..2cf1920 100644
--- a/about.html
+++ b/about.html
@@ -30,9 +30,9 @@
 <h2 id="configuration">Configuration</h2>
 <p>Once installed, <code>my-x200</code> is configured by editing <code>/etc/default/my-x200</code>.</p>
 <h2 id="noise-removal">Noise Removal</h2>
-<p>Set the variable <code>is_thinkpad_x200</code> to <code>yes</code> (which is the default value). The default frequency rate should work. It may be change by modifying the value of <code>PWMFREQ_RATE</code>.</p>
+<p>Set the variable <code>is_thinkpad_x200</code> to <code>yes</code> (which is the default value). The default frequency rate should work. It may be changed by modifying the value of <code>PWMFREQ_RATE</code>.</p>
 <h2 id="privacy-settings">Privacy Settings</h2>
-<p><code>/etc/default/my-x200</code> also provides a “Privacy settings” section: if <code>enable_privacy</code> is set to <code>true</code>, then the wired internet interface that may or may not be connected to the internet will have its MAC address spoofed at startup. (The wireless interfaces must also be spoofed, but this can be handled by wpa_supplicant: see below.) Additionally, <code>my-x200</code> will delete <code>/var/lib/dhcpcd/duid</code>, and use <code>/proc/sys/kernel/random/boot_id</code> to generate a new DUID-LLT based file with an updated timestamp. A new DUID is generated each time the computer is started.</p>
+<p><code>/etc/default/my-x200</code> also provides a “Privacy Settings” section: if <code>enable_privacy</code> is set to <code>true</code>, then the wired internet interface that may or may not be connected to the internet will have its MAC address spoofed at startup. (The wireless interfaces must also be spoofed, but this can be handled by wpa_supplicant: see below.) Additionally, <code>my-x200</code> will delete <code>/var/lib/dhcpcd/duid</code>, and use <code>/proc/sys/kernel/random/boot_id</code> to generate a new DUID-LLT-based file with an updated timestamp. A new DUID is generated each time the computer is started.</p>
 <h2 id="backup">Backup</h2>
 <p>Finally <code>my-x200</code> has the ability to backup essential files or directories—for instance to a backup disk mounted inside the dock. Of course, the backup process is triggered on certain conditions only:</p>
 <ol type="1">