1 files changed, 16 insertions, 14 deletions

diff --git a/ekdosis.dtx b/ekdosis.dtx
index 7cfb10e..3e6ba5f 100644
--- a/ekdosis.dtx
+++ b/ekdosis.dtx
@@ -61,7 +61,7 @@ along with this program.  If not, see
 %<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
 %<package>\ProvidesPackage{ekdosis}
 %<*package>
-    [2021/08/16 v1.3-dev Typesetting TEI xml-compliant critical editions]
+    [2021/08/17 v1.3 Typesetting TEI xml-compliant critical editions]
 %</package>
 %<*driver>
 \begin{filecontents}[noheader,overwrite]{bibdata.xml}
@@ -442,6 +442,7 @@ along with this program.  If not, see
 \end{filecontents}
 \begin{filecontents}[overwrite]{\jobname-ekd.cfg}
 \footnotelayout{m}
+\SetCritSymbols{suppbegin = 〈,suppend = 〉}
 \EnvtoTEI{ancientgreek}{p}[xml:lang="grc"]
 \DeclareApparatus{fontium}[
         delim=\hskip0.75em,
@@ -452,7 +453,6 @@ along with this program.  If not, see
         delim=\hskip0.75em]
 \DeclareApparatus{rtl}[
         direction=RL,
-        sep={[ },
         delim=\hskip0.75em]
 \DeclareWitness{M}{M}{\emph{Marcianus Gr.} 269}[
         settlement=Venice,
@@ -842,7 +842,7 @@ along with this program.  If not, see
 %</driver>
 % \fi
 %
-% \CheckSum{0}
+% \CheckSum{2519}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -1194,10 +1194,10 @@ along with this program.  If not, see
 % \begin{enumerate}
 % \item |layout=float| By default, layers of critical notes are
 %   inserted as floating environments to be printed at the bottom of
-%   pages.
+%   the pages.
 % \item |layout=footins| This can be set to insert critical notes in
 %   the default footnote block which can be considered to be a special
-%   kind of float that is printed at the bottom of pages. In this
+%   kind of float that is printed at the bottom of the pages. In this
 %   case, the apparatus criticus will be inserted between regular
 %   numbered footnotes, but will carry no footnote mark of its own.
 % \item \label{ref:keyfloat-opt}\newfeature[v1.3] |layout=keyfloat|
@@ -1898,6 +1898,8 @@ yesterday.
 % |nosep| must be used when for some reason no \cs{rdg} command
 % follows a \cs{lem} command that has just been used, as shown below
 % in \vref{lst:emend-coni-corr}, l.~7.
+% 
+% \needspace{2\baselineskip}
 % \danger \DescribeMacro{\ekdsep} If |nosep| be used so as to insert
 % an explanatory note after the lemma text with the \cs{note} command
 % described below \vpageref{ref:editorial-notes}, then \cs{ekdsep} can
@@ -7649,7 +7651,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \paragraph{Setup}
 % \begin{macro}{\ekdsetup}
-% \changes{v1.3}{2021/08/16}{new command for global options}
+% \changes{v1.3}{2021/08/17}{new command for global options}
 % \cs{ekdsetup} is used to specify options that affect the general
 % behavior of \pkg{ekdosis}. It is a preamble-only command.
 %    \begin{macrocode}
@@ -7672,7 +7674,7 @@ Sample text with a \textcolor{red}{word} in red.
 %   \texttt{lemmastyle}}
 %   \changes{v1.2}{2021/04/02}{general hooks: new option
 %   \texttt{readingstyle}}
-%   \changes{v1.3}{2021/08/16}{general hooks: new options
+%   \changes{v1.3}{2021/08/17}{general hooks: new options
 %   \texttt{keyparopts} and \texttt{appheight}}
 %    \begin{macrocode}
 \ekvdefinekeys{ekd@hooks}{
@@ -7893,7 +7895,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\teidirect}
-% \changes{v1.3}{2021/08/16}{direct insertion of elements in the
+% \changes{v1.3}{2021/08/17}{direct insertion of elements in the
 % \texttt{TEI xml} file}
 % \cs{teidirect}\oarg{xml attributes}\marg{xml element}\marg{code}
 % does nothing in \LaTeX. Its only use is to insert elements in the
@@ -8260,7 +8262,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\SetApparatusNoteLanguage}
-% \changes{v1.3}{2021/08/16}{defines an alternate language to be
+% \changes{v1.3}{2021/08/17}{defines an alternate language to be
 % applied in note apparatus entries}
 % \cs{SetApparatusNoteLang}\marg{languagename} can be used when
 % it is needed to apply in entries introduced by the \cs{note} command
@@ -9522,7 +9524,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\endmark}
-% \changes{v1.3}{2021/08/16}{prints the last-emitted mark of the
+% \changes{v1.3}{2021/08/17}{prints the last-emitted mark of the
 % preceding page}
 % By default, \cs{ekdmark} described below prints the first mark
 % that is emitted on a given page and ignores the mark corresponding
@@ -9544,7 +9546,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\edkmark}
-% \changes{v1.3}{2021/08/16}{prints marks in headers or footers}
+% \changes{v1.3}{2021/08/17}{prints marks in headers or footers}
 % \cs{ekdmark} is an argument-less command called in commands used to
 % make headers and footers where the marks stored by means of the
 % |mark| optional argument of \cs{ekddiv} are to be printed.
@@ -9555,7 +9557,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\ekdprintmark}
-% \changes{v1.3}{2021/08/16}{prints or removes the marks in headers
+% \changes{v1.3}{2021/08/17}{prints or removes the marks in headers
 % and footers} \cs{ekdprintmark}\marg{selector}\marg{signpost} The
 % signposts printed in headers and footers must be 
 % passed as second argument of \cs{ekdprintmark} so that \pkg{ekdosis}
@@ -9593,7 +9595,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\ekdnofhmarks}
-% \changes{v1.3}{2021/08/16}{removes headers and footers on specific
+% \changes{v1.3}{2021/08/17}{removes headers and footers on specific
 % pages} Once the signposts are marked with \cs{ekdprintmark},
 % \cs{ekdnohfmarks} has the same effect as the \LaTeX\ standard
 % command \cs{thispagestyle}|{empty}|.
@@ -9604,7 +9606,7 @@ Sample text with a \textcolor{red}{word} in red.
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\ekdresethfmarks}
-% \changes{v1.3}{2021/08/16}{marks headers and footers as printable}
+% \changes{v1.3}{2021/08/17}{marks headers and footers as printable}
 % \cs{ekdresethfmarks} can be used in rare cases when it is needed to
 % reset headers and footers to their original, viz.\ printable state.
 %    \begin{macrocode}