1 files changed, 47 insertions, 20 deletions

diff --git a/arabluatex.dtx b/arabluatex.dtx
index 4bd9057..f85c0c5 100644
--- a/arabluatex.dtx
+++ b/arabluatex.dtx
@@ -191,8 +191,11 @@
 \CodelineIndex
 \begin{document}
   \DocInput{arabluatex.dtx}
+  \printbibliography[heading=bibintoc]
+  \phantomsection
   \addcontentsline{toc}{section}{Change History}
   \PrintChanges
+  \phantomsection
   \addcontentsline{toc}{section}{Index}
   \PrintIndex
 \end{document}
@@ -506,21 +509,24 @@
 % \end{quote}
 % \item The euphonic \arb[trans]{ta^sdId} is generated (see
 %   \vpageref{ref:euphonic-tashdid}).
-% \item Assimilation rules laid on \vref{ref:assimilation} are
-%   applied.
 % \item In |fullvoc| mode, the \arb[trans]{sukUn} is expressed.
 % \end{compactitem}
 % 
 % \DescribeMacro{\SetArbEasy} \NEWfeature{v1.4.4}
 % \DescribeMacro{\SetArbEasy*} \DescribeMacro{\SetArbDflt} Such
-% refinements may be discarded by the command \cs{SetArbEasy}, either
-% globally in the preamble or locally at any point of the
-% document. The difference between \cs{SetArbEasy} and its
-% \enquote*{starred} version \cs{SetArbEasy*} is that the former keeps
-% the \arb[trans]{sukUn} that is generated by the |fullvoc| mode,
-% while the latter further takes it away. Default \enquote*{classic}
-% rules may be set back at any point of the document with the command
-% \cs{SetArbDflt}. Examples follow:---
+% refinements as \enquote*{classic} \arb[trans]{maddaT} may be
+% discarded by the command \cs{SetArb\allowbreak{}Easy}, either globally in the
+% preamble or locally at any point of the document. The difference
+% between \cs{SetArbEasy} and its \enquote*{starred} version
+% \cs{SetArbEasy*} is that the former keeps the \arb[trans]{sukUn}
+% that is generated by the |fullvoc| mode, while the latter further
+% takes it away. Default \enquote*{classic} rules may be set back at
+% any point of the document with the command
+% \cs{SetArbDflt}. \NEWfeature{v1.6}
+% \DescribeMacro{\SetArbDflt*}Assimilation rules laid on
+% \vref{ref:assimilation} may also be applied by the
+% \enquote*{starred} version of this command \cs{SetArbDflt*} either
+% in the preamble or at any point of the document. Examples follow:---
 % \begin{compactenum}[(a)]
 % \item \cs{SetArbDflt}:
 %   \begin{compactenum}[i.]
@@ -531,6 +537,15 @@
 %   \item |trans| \arb[trans]{wa-mAta istisqA'aN qabla 'an yutimma
 %     kitAba-hu fI nujUm-i 'l-samA'-i}
 %   \end{compactenum}
+% \item \cs{SetArbDflt*}:
+%   \begin{compactenum}[i.]\SetArbDflt*
+%   \item |voc| \arb[voc]{wa-mAta istisqA'aN qabla 'an yutimma
+%     kitAba-hu fI nujUm-i 'l-samA'-i}
+%   \item |fullvoc| \arb[fullvoc]{wa-mAta istisqA'aN qabla 'an yutimma
+%     kitAba-hu fI nujUm-i 'l-samA'-i}
+%   \item |trans| \arb[trans]{wa-mAta istisqA'aN qabla 'an yutimma
+%     kitAba-hu fI nujUm-i 'l-samA'-i}\SetArbDflt
+%   \end{compactenum}
 % \item \cs{SetArbEasy}:
 %   \begin{compactenum}[i.]\SetArbEasy
 %   \item |voc| \arb[voc]{wa-mAta istisqA'aN qabla 'an yutimma
@@ -1153,7 +1168,7 @@ vowels (see §~3).
 %   \arb[novoc]{l}, \arb[novoc]{m}, \arb[novoc]{w}, \arb[novoc]{y}
 %   after \arb[voc]{n} with \arb[trans]{jazmaT}, and also after the
 %   \arb[trans]{tanwIn}:---
-% \begin{quote}
+% \begin{quote}\SetArbDflt*
 %   Note the absence of \arb[trans]{sukUn} above the passed over
 %   \arb[novoc]{n} in the following examples, each of which is
 %   accompanied by a consistent transliteration: |min rabbi-hi|
@@ -1162,8 +1177,22 @@ vowels (see §~3).
 %   |'an| |yaqtula| \arb[fullvoc]{'an yaqtula} \arb[trans]{'an yaqtula}.
 %   
 %   With \arb[trans]{tanwIn}: |kitAbuN| |mubInuN| \arb[voc]{kitAbuN
-%   mubInuN} \arb[trans]{kitAbuN mubInuN}.
+%   mubInuN} \arb[trans]{kitAbuN mubInuN}.\SetArbDflt
 % \end{quote}
+% \iffalse
+%<*example>
+% \fi
+\begin{arabluacode}[text only]
+  \textsc{Rem.} This particular feature must be put into operation by
+  the command \cs{SetArbDflt*} explicitly. See above
+  \vref{sec:classic-modern-typesetting} for further details. Other
+  kinds of assimilations, including the various cases of
+  \arb[trans]{'id.gAm}, will be included in \package{arabluatex}
+  gradually.
+\end{arabluacode}
+% \iffalse
+%</example>
+% \fi
 % \item With the letter \arb[voc]{t} after the dentals
 %   \arb[novoc]{_t}, \arb[novoc]{d}, \arb[novoc]{_d}, \arb[novoc]{.d},
 %   \arb[novoc]{.t}, \arb[novoc]{.z} in certain parts of the verb:
@@ -1540,7 +1569,7 @@ vowels (see §~3).
 % \end{quote}
 %
 % \subsubsection{\texorpdfstring{Quoting the
-% \arb[trans]{hamzaT}}{Quoting the hamza}}
+% \arb[trans]{hamzaT}}{Quoting the hamzah}}
 % \label{sec:quoting-hamza}
 % As said above in \vref{ref:hamza}, the \arb[trans]{hamzaT} is always
 % written \meta{\texttt{'}}, its carrier being determined by contextual
@@ -2753,11 +2782,11 @@ wa-ya.sIru ta.hta 'l-jild-i
 %   back at any point of the document with \cs{SetArbDflt}.
 % \begin{macro}{\SetArbDflt*}
 %   \changes{v1.6}{2016/11/30}{This starred version applies the
-%   assimilation rules (\arb[trans]{al-'id.gAm}) in addition to what
-%   \cs{SetArbDflt} already does.} As of v1.6, \package{arabluatex}
-%   does not applies any more the assimilation rules that are laid on
-%   \vref{ref:assimilation}; a new starred version \cs{SetArbDflt*} is
-%   now available to the user should he wish to apply them.
+%   assimilation rules in addition to what \cs{SetArbDflt} already
+%   does.} As of v1.6, \package{arabluatex} does not applies any more
+%   the assimilation rules that are laid on \vref{ref:assimilation}; a
+%   new starred version \cs{SetArbDflt*} is now available to the user
+%   should he wish to apply them.
 %    \begin{macrocode}
 \def\al@arb@rules{dflt}
 \NewDocumentCommand{\SetArbEasy}{s}{%
@@ -3128,7 +3157,5 @@ wa-ya.sIru ta.hta 'l-jild-i
 %</patch>
 % \fi
 %
-% \printbibliography[heading=bibintoc]
-%
 % \Finale
 \endinput